CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
首页Home / 产品服务Products / 药物标准品Pharmaceutical Standards / 1,1,3,3-四乙基-1,3-二甲基二硅氧烷 (CAS 号 1000-00-6)1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane (CAS No. 1000-00-6)

1,1,3,3-四乙基-1,3-二甲基二硅氧烷1,1,3,3-Tetraethyl-1,3-dimethyldisiloxaneCAS 号No. 1000-00-6

1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane

>95%现货In stock药物标准品Pharmaceutical StandardsPubChem CID 262875
CAS 号CAS No.1000-00-6
分子式Molecular FormulaC10H26OSi2
分子量Molecular Weight218.48 g/mol
分类Category药物标准品 / Pharmaceutical StandardsPharmaceutical Standards
纯度Purity>95%
库存状态Stock现货 97%+
询价 / 索取 COAQuote / COA该类全部品种All in this field

化学结构式Chemical structure

1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only

需要报价或 COA?Need a quote or COA?

直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.

提交在线询价Submit enquiry

产品介绍Product description

CATO 佳途供应的1,1,3,3-四乙基-1,3-二甲基二硅氧烷(1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane)为药物标准品,CAS 登记号 1000-00-6,分子式 C10H26OSi2,分子量 218.48。纯度 97%+。产品现货库存充足,可提供定制化规格与批次追踪服务。

1,1,3,3-四乙基-1,3-二甲基二硅氧烷的产生途径与其化学式中含羟基,含醚键密切相关,该结构特征决定了其在合成/纯化或降解过程中出现的概率与行为。 化学式为 C10H26OSi2 的1,1,3,3-四乙基-1,3-二甲基二硅氧烷(1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane),其CAS登记号是 1000-00-6,分子量为 218.48 g/mol。 1,1,3,3-四乙基-1,3-二甲基二硅氧烷(C10H26OSi2)含有含羟基,含醚键。较高的碳氢比使其脂溶性较好,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。由于碳链较长,脂溶性良好,该化合物在Octanol-Water分配系数测试中倾向于有机相。 本品适用于HPLC、GC、LC-MS/MS、GC-MS等主要色谱平台的定量分析,可作为外标法校准标准品或系统适用性测试参考物质使用。 在质量保证方面,1,1,3,3-四乙基-1,3-二甲基二硅氧烷的生产和定值严格遵循ISO 17034:2016(认证标准物质生产者)的要求。纯度定值采用

1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane (CAS 1000-00-6) is supplied by CATO as pharmaceutical standards for analytical and quality-control use.

Molecular formula C10H26OSi2, molecular weight 218.48 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.

1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.

Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.

应用场景Application notes

1,1,3,3-四乙基-1,3-二甲基二硅氧烷(1,1,3,3-Tetraethyl-1,3-dimethyldisiloxane)作为药物标准品,在化学分析分析领域承担着重要的角色。 推荐以1,1,3,3-四乙基-1,3-二甲基二硅氧烷配制标准系列工作溶液,用于建立标准曲线实现外标法定量。 建议使用乙腈为溶剂配制储备溶液,根据检测灵敏度需求逐级稀释。 使用建议: - 称量前将样品在干燥器内平衡至室温(约30分钟); - 储备溶液建议用乙腈配制,于室温保存条件下储存; - 低浓度工作液(<10 μg/mL)建议当天配制使用,不宜长期存放; - 开启安瓿瓶/西林瓶后应在干燥环境下尽快

Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.

Detailed recommended procedures are provided in the Chinese datasheet.

理化性质Physical & Chemical Properties

外观形态Appearance白色至类白色结晶性粉末
储存条件Storage室温保存
溶解性参考Solubility可溶于氯仿、二氯甲烷、乙酸乙酯、DMSO
稳定性Stability在推荐条件下性质稳定
化合物类型Compound Type药物标准品
子类Sub-class原料药标准品
不饱和度(DBE)Unsaturation (DBE)-2.0
CAS登记年份(估)CAS Reg. Year (est.)1957年

性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.

结构标识Identifiers

SMILESCC[Si](C)(CC)O[Si](C)(CC)CC
InChIKeyILYAQWBKAVFRGF-UHFFFAOYSA-N
IUPAC Name[diethyl(methyl)silyl]oxy-diethyl-methylsilane

标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.

杂质信息与使用建议Impurity information and usage notes

以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.

典型用途Typical use

常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.

储存与操作Storage and handling

标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.

质量文件Quality documentation

随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.

杂质类型Impurity class

按名称归类为「标准品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Reference standard”. Final assignment should follow your own process and degradation studies.

询价 / 索取 COARequest a quote / COA

提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.

常规规格Standard pack sizes现货In stock