CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
首页Home / 产品服务Products / 药物标准品Pharmaceutical Standards / 1-甲基-3-氨基-4-苯氧基吲唑 (CAS 号 1000018-07-4)3-Amino-1-methyl-4-phenoxyindazole (CAS No. 1000018-07-4)

1-甲基-3-氨基-4-苯氧基吲唑3-Amino-1-methyl-4-phenoxyindazoleCAS 号No. 1000018-07-4

3-Amino-1-methyl-4-phenoxyindazole

>95%现货In stock药物标准品Pharmaceutical StandardsPubChem CID 26369217
CAS 号CAS No.1000018-07-4
分子式Molecular FormulaC14H13N3O
分子量Molecular Weight239.27 g/mol
分类Category药物标准品 / Pharmaceutical StandardsPharmaceutical Standards
纯度Purity>95%
库存状态Stock现货 97%+
询价 / 索取 COAQuote / COA该类全部品种All in this field

化学结构式Chemical structure

3-Amino-1-methyl-4-phenoxyindazole structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only

需要报价或 COA?Need a quote or COA?

直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.

提交在线询价Submit enquiry

产品介绍Product description

本产品为药物标准品1-甲基-3-氨基-4-苯氧基吲唑(3-Amino-1-methyl-4-phenoxyindazole,CAS 1000018-07-4),分子式 C14H13N3O,分子量 239.27。纯度 97%+。适用于分析方法开发、方法验证及日常质检,CATO 提供全程冷链与全球配送。

在现行药典和法规框架下,药物标准品的合规要求中明确涉及对包括1-甲基-3-氨基-4-苯氧基吲唑在内的目标物的控制。 CAS编号 1000018-07-4 对应的化合物1-甲基-3-氨基-4-苯氧基吲唑(英文标识 3-Amino-1-methyl-4-phenoxyindazole),化学式 C14H13N3O,相对分子质量 239.27。 1-甲基-3-氨基-4-苯氧基吲唑(C14H13N3O)含有含氮杂环结构,酰胺类,含羟基,含醚键。较高的碳氢比使其脂溶性较好,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。分子中的氮原子赋予该化合物一定的碱性特征,在酸性流动相条件下可被有效质子化。 本品适用于HPLC、GC、LC-MS/MS、GC-MS等主要色谱平台的定量分析,可作为外标法校准标准品或系统适用性测试参考物质使用。 作为认证标准物质(CRM),1-甲基-3-氨基-4-苯氧基吲唑满足CNAS-CL04(ISO/IEC 17025)对标准物质的计量溯源性要求。批间一致性通过控制图(Control Chart)进行持续监控,保证

3-Amino-1-methyl-4-phenoxyindazole (CAS 1000018-07-4) is supplied by CATO as pharmaceutical standards for analytical and quality-control use.

Molecular formula C14H13N3O, molecular weight 239.27 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.

3-Amino-1-methyl-4-phenoxyindazole is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.

Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.

应用场景Application notes

从实际应用出发,1-甲基-3-氨基-4-苯氧基吲唑(CAS 1000018-07-4)在化学分析中作为关键的基准对照物质。 推荐以1-甲基-3-氨基-4-苯氧基吲唑配制标准系列工作溶液,用于建立标准曲线实现外标法定量。 建议使用甲醇/乙腈(1:1)为溶剂配制储备溶液,根据检测灵敏度需求逐级稀释。 使用建议: - 称量前将样品在干燥器内平衡至室温(约30分钟); - 储备溶液建议用甲醇/乙腈(1:1)配制,于2-8°C冷藏保存,避光条件下储存; - 低浓度工作液(<10 μg/mL)建议当天配制使用,不宜长期存放; - 开启安瓿瓶/西林瓶后应在干燥环境下尽快使用,防止吸潮影响称量准确

Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.

Detailed recommended procedures are provided in the Chinese datasheet.

理化性质Physical & Chemical Properties

外观形态Appearance淡黄色至黄色低熔点固体
储存条件Storage2-8°C冷藏保存,避光
溶解性参考Solubility可溶于DMSO、DMF、甲醇
稳定性Stability对光敏感,应避免强光直射
化合物类型Compound Type药物标准品
子类Sub-class原料药标准品
不饱和度(DBE)Unsaturation (DBE)10.0
UV特征UV Absorption有紫外吸收
结构特征Structural Features含芳环
CAS登记年份(估)CAS Reg. Year (est.)1988年
含氮原子数Nitrogen Atoms3

性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.

结构标识Identifiers

SMILESCN1C2=C(C(=CC=C2)OC3=CC=CC=C3)C(=N1)N
InChIKeyWRWPMLQRWYBBLY-UHFFFAOYSA-N
IUPAC Name1-methyl-4-phenoxyindazol-3-amine

标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.

杂质信息与使用建议Impurity information and usage notes

以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.

典型用途Typical use

常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.

储存与操作Storage and handling

标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.

质量文件Quality documentation

随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.

杂质类型Impurity class

按名称归类为「标准品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Reference standard”. Final assignment should follow your own process and degradation studies.

询价 / 索取 COARequest a quote / COA

提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.

常规规格Standard pack sizes现货In stock