常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
4-二苯并呋喃硼酸4-Dibenzofuranboronic AcidCAS 号No. 100124-06-9
4-Dibenzofuranboronic Acid
| CAS 号CAS No. | 100124-06-9 |
| 分子式Molecular Formula | C12H9BO3 |
| 分子量Molecular Weight | 212.01 g/mol |
| 分类Category | 药物标准品 / Pharmaceutical StandardsPharmaceutical Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 97%+ |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
本产品为药物标准品4-二苯并呋喃硼酸(4-Dibenzofuranboronic Acid,CAS 100124-06-9),分子式 C12H9BO3,分子量 212.01。纯度 97%+。适用于分析方法开发、方法验证及日常质检,CATO 提供全程冷链与全球配送。
推荐用于分析方法开发与验证,产品提供完整COA证书,确保ISO 17034标准的量值溯源要求。适用于GLP实验室的日常分析。 化学式为 C12H9BO3 的4-二苯并呋喃硼酸(4-Dibenzofuranboronic Acid),其CAS登记号是 100124-06-9,分子量为 212.01 g/mol。 依据分子式为 C12H9BO3 的4-二苯并呋喃硼酸结构特征,其分子内含羧酸类,含羟基,含醚键,这意味着该化合物在紫外光谱中会呈现特征性的吸收带。分子量 212.01 g/mol 这一参数对质谱检测中的分子离子峰识别具有直接参考价值。由于碳链较长,脂溶性良好,该化合物在Octanol-Water分配系数测试中倾向于有机相。 本品定值报告包含以下质量控制信息: - 主成分含量:97%+; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNMR法、DSC法等正交验证; - 不确定度:扩展不确定度(k=2)包含测量重复性、均匀性和稳定性分量。
4-Dibenzofuranboronic Acid (CAS 100124-06-9) is supplied by CATO as pharmaceutical standards for analytical and quality-control use.
Molecular formula C12H9BO3, molecular weight 212.01 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
4-Dibenzofuranboronic Acid is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
从实际应用出发,4-二苯并呋喃硼酸(CAS 100124-06-9)在化学分析中作为关键的基准对照物质。 推荐以4-二苯并呋喃硼酸配制标准系列工作溶液,用于建立标准曲线实现外标法定量。 建议使用乙腈为溶剂配制储备溶液,根据检测灵敏度需求逐级稀释。 使用建议: - 称量前将样品在干燥器内平衡至室温(约30分钟); - 储备溶液建议用乙腈配制,于2-8°C冷藏保存,避光,密封防潮条件下储存; - 低浓度工作液(<10 μg/mL)建议当天配制使用,不宜长期存放; - 开启安瓿瓶/西林瓶后应在干燥环境下尽快使用,防止吸潮影响称量准确性。
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 淡黄色至黄色结晶性粉末 |
| 储存条件Storage | 2-8°C冷藏保存,避光,密封防潮 |
| 溶解性参考Solubility | 可溶于氯仿、二氯甲烷、乙酸乙酯、DMSO |
| 稳定性Stability | 空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射;具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物标准品 |
| 子类Sub-class | 原料药标准品 |
| 不饱和度(DBE)Unsaturation (DBE) | 8.5 |
| UV特征UV Absorption | 有紫外吸收 |
| 结构特征Structural Features | 含芳环 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1985年 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「标准品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Reference standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.