常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
泼尼松杂质N56Prednisone Impurity N56CAS 号No. 103466-44-0
Prednisone Impurity N56
| CAS 号CAS No. | 103466-44-0 |
| 分子式Molecular Formula | C23H26O5 |
| 分子量Molecular Weight | 382.4 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 97%+ |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
本产品为药物杂质对照品泼尼松杂质N56(Prednisone Impurity N56,CAS 103466-44-0),分子式 C23H26O5,分子量 382.45。纯度 97%+。适用于分析方法开发、方法验证及日常质检,CATO 提供全程冷链与全球配送。
在现行药典和法规框架下,药物杂质对照品的合规要求中明确涉及对包括泼尼松杂质N56在内的目标物的控制。 作为药物质量控制的关键分析对照品,泼尼松杂质N56(Prednisone Impurity N56)的系统命名为泼尼松杂质N56,CAS号 103466-44-0,分子量为 382.45 g/mol。 泼尼松杂质N56(C23H26O5)含有黄酮骨架,含羟基,含醚键。羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。分子中包含芳环或共轭体系,在UV-Vis光谱中具有特征性吸收带,适用于紫外或二极管阵列检测器(DAD)的定量分析。 本品满足ISO 17034:2016和ISO Guide 35对认证标准物质的要求,适用于通过ISO/IEC 17025认可的GMP质量控制实验室。 每批次泼尼松杂质N56均采用质量平衡法结合定量NMR(qNMR)进行纯度定值,提供包含扩展不确定度(k=2)的COA证书,确保分析结果的计量溯源性。 在质量保证方面,泼尼松杂质N56的生产和定值严格遵循ISO 17034:2016(
Prednisone Impurity N56 (CAS 103466-44-0) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C23H26O5, molecular weight 382.4 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
Prednisone Impurity N56 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
泼尼松杂质N56(Prednisone Impurity N56)作为药物杂质对照品,在药品质量控制和药物分析分析领域承担着重要的角色。 关键分析参数优化: - 检测波长 :254nm(可根据实际情况在210-280 nm范围内优化); - 柱温 :推荐30-35°C,确保保留时间重现性; - 进样量 :推荐10-20 μL,检测灵敏度不足时可适当增加; - 流速 :1.0 mL/min(4.6 mm内径色谱柱)或相应比例调整。 基质效应评估 :建议采用柱后注入法或提取后加入法评估基质效应,必要时采用基质匹配标准曲线或同位素内标克服基质干扰。 使用建议:
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 淡黄色至黄色结晶性粉末 |
| 储存条件Storage | 2-8°C冷藏保存,避光,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙腈、DMSO、水(微溶) |
| 稳定性Stability | 空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 11.0 |
| UV特征UV Absorption | 有紫外吸收 |
| 结构特征Structural Features | 含芳环 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1986年 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.