常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
钆布醇杂质N141,3-Dioxepane-5,6-diol, 2,2-dimethyl-CAS 号No. 1629961-94-9
1,3-Dioxepane-5,6-diol, 2,2-dimethyl-
| CAS 号CAS No. | 1629961-94-9 |
| 分子式Molecular Formula | C7H14O4 |
| 分子量Molecular Weight | 162.18 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 >95% |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
钆布醇杂质N14(英文名 1,3-Dioxepane-5,6-diol, 2,2-dimethyl-,CAS 1629961-94-9)属于药物杂质对照品。分子式 C7H14O4,分子量 162.18。纯度 >95%。佳途科技作为 ISO 17034 认可的标准物质生产商,为该产品提供完整的质量文件与技术支持。
钆布醇杂质N14(分子式 C7H14O4)的化学结构中包含羧酸类,含羟基,含醚键。在反相色谱体系中,其保留行为主要受官能团的极性和离子化状态影响,这为HPLC-UV/DAD或LC-MS方法的建立提供了重要依据。 作为药物质量控制的关键分析对照品,钆布醇杂质N14(1,3-Dioxepane-5,6-diol, 2,2-dimethyl-)的系统命名为钆布醇杂质N14,CAS号 1629961-94-9,分子量为 162.18 g/mol。 本品推荐用于有关物质检查的方法开发与验证,符合ICH Q3A/Q3B对药物杂质控制的指导原则。在系统适用性试验中,钆布醇杂质N14可作为HPLC分离度考察的标准品,确保色谱系统对主成分与相邻杂质的分离满足药典要求。在强制降解实验框架下,本品可用于鉴定特定降解产物,支持药物稳定性研究中的杂质谱完整表征。 作为认证标准物质(CRM),钆布醇杂质N14满足CNAS-CL04(ISO/IEC 17025)对标准物质的计量溯源性要求。批间一致性通过控制图(Control Chart)进行持续监控,保证不同批次间量值
1,3-Dioxepane-5,6-diol, 2,2-dimethyl- (CAS 1629961-94-9) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C7H14O4, molecular weight 162.18 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
1,3-Dioxepane-5,6-diol, 2,2-dimethyl- is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
针对药品质量控制和药物分析用途,钆布醇杂质N14(1,3-Dioxepane-5,6-diol, 2,2-dimethyl-)是具有明确定量溯源的认证级对照品。 推荐应用流程: 1. 样品前处理 — 依据原料药或制剂特性,选择适当的提取和净化方法; 2. 色谱条件建立 — 以钆布醇杂质N14(纯度>95%)配制系统适用性溶液,验证分离度(Rs)不小于1.5; 3. 系统适用性 — 连续进样6针计算峰面积RSD,应不大于2.0%; 4. 定量流程 — 外标法或校正因子法计算目标杂质含量,结果以%面积报告。 质量控制要求:每批分析应包含空白、质控和双重分析(du
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 白色至类白色结晶性粉末 |
| 储存条件Storage | 2-8°C冷藏保存,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙醇、DMSO、水 |
| 稳定性Stability | 具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 1.0 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1993年 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「标准品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Reference standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.