CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
首页Home / 产品服务Products / 氘代试剂标准品Deuterated Standards / 3-十二烷基噻吩-2-氘代 (CAS 号 2122800-12-6)3-Dodecylthiophene-2-D (CAS No. 2122800-12-6)

3-十二烷基噻吩-2-氘代3-Dodecylthiophene-2-DCAS 号No. 2122800-12-6

3-Dodecylthiophene-2-D

>95%现货In stock氘代试剂标准品Deuterated StandardsPubChem CID 146162441
CAS 号CAS No.2122800-12-6
分子式Molecular FormulaC16H28S
分子量Molecular Weight253.5 g/mol
分类Category氘代试剂标准品 / Deuterated StandardsDeuterated Standards
纯度Purity>95%
库存状态Stock现货 97%+
询价 / 索取 COAQuote / COA该类全部品种All in this field

化学结构式Chemical structure

3-Dodecylthiophene-2-D structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only

需要报价或 COA?Need a quote or COA?

直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.

提交在线询价Submit enquiry

产品介绍Product description

CATO 佳途供应的3-十二烷基噻吩-2-氘代(3-Dodecylthiophene-2-D)为药物标准品,CAS 登记号 2122800-12-6,分子式 C16H28S,分子量 252.46。纯度 97%+。产品现货库存充足,可提供定制化规格与批次追踪服务。

与同类药物标准品相比,3-十二烷基噻吩-2-氘代的分子量为252.46 g/mol这一特征使其在色谱分离条件和质谱检测参数设置上具有独特性。 CAS编号 2122800-12-6 对应的化合物3-十二烷基噻吩-2-氘代(英文标识 3-Dodecylthiophene-2-D),化学式 C16H28S,相对分子质量 252.46。 3-十二烷基噻吩-2-氘代(C16H28S)含有含硫有机。较高的碳氢比使其脂溶性较好,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。分子中包含芳环或共轭体系,在UV-Vis光谱中具有特征性吸收带,适用于紫外或二极管阵列检测器(DAD)的定量分析。 推荐用于分析方法开发与验证,产品提供完整COA证书,确保ISO 17034标准的量值溯源要求。适用于GLP实验室的日常分析。 本品定值报告包含以下质量控制信息: - 主成分含量:97%+; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNMR法、DSC法等正交验证; - 不确定

3-Dodecylthiophene-2-D (CAS 2122800-12-6) is supplied by CATO as deuterated standards for analytical and quality-control use.

Molecular formula C16H28S, molecular weight 253.5 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.

3-Dodecylthiophene-2-D is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.

Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.

应用场景Application notes

针对化学分析用途,3-十二烷基噻吩-2-氘代(3-Dodecylthiophene-2-D)是具有明确定量溯源的认证级对照品。 推荐以3-十二烷基噻吩-2-氘代配制标准系列工作溶液,用于建立标准曲线实现外标法定量。 建议使用乙腈为溶剂配制储备溶液,根据检测灵敏度需求逐级稀释。 使用建议: - 称量前将样品在干燥器内平衡至室温(约30分钟); - 储备溶液建议用乙腈配制,于室温保存条件下储存; - 低浓度工作液(<10 μg/mL)建议当天配制使用,不宜长期存放; - 开启安瓿瓶/西林瓶后应在干燥环境下尽快使用,防止吸潮影响称量准确性。

Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.

Detailed recommended procedures are provided in the Chinese datasheet.

理化性质Physical & Chemical Properties

外观形态Appearance白色至类白色低熔点固体。(含硫化合物特征性气味)
储存条件Storage室温保存
溶解性参考Solubility可溶于氯仿、二氯甲烷、乙酸乙酯
稳定性Stability在推荐条件下性质稳定
化合物类型Compound Type药物标准品
子类Sub-class原料药标准品
不饱和度(DBE)Unsaturation (DBE)3.0
UV特征UV Absorption有紫外吸收
CAS登记年份(估)CAS Reg. Year (est.)1997年
含硫原子数含硫原子数1

性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.

结构标识Identifiers

SMILES[2H]C1=C(C=CS1)CCCCCCCCCCCC
InChIKeyRFKWIEFTBMACPZ-RWFJLFJASA-N
IUPAC Name2-deuterio-3-dodecylthiophene

标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.

杂质信息与使用建议Impurity information and usage notes

以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.

典型用途Typical use

常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.

储存与操作Storage and handling

标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.

质量文件Quality documentation

随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.

杂质类型Impurity class

按名称归类为「标准品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Reference standard”. Final assignment should follow your own process and degradation studies.

询价 / 索取 COARequest a quote / COA

提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.

常规规格Standard pack sizes现货In stock