常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
羧甲司坦杂质N1Carbocisteine Impurity N1CAS 号No. 31898-75-6
Carbocisteine Impurity N1
| CAS 号CAS No. | 31898-75-6 |
| 分子式Molecular Formula | C5H7NO3S |
| 分子量Molecular Weight | 161.18 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 97%+ |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
羧甲司坦杂质N1(英文名 Carbocisteine Impurity N1,CAS 31898-75-6)属于药物杂质对照品。分子式 C5H7NO3S,分子量 161.18。纯度 97%+。佳途科技作为 ISO 17034 认可的标准物质生产商,为该产品提供完整的质量文件与技术支持。
羧甲司坦杂质N1(C5H7NO3S)含有酰胺类,含砜基,羧酸类,含羟基,含醚键。具有较强的吸湿性,羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。分子中的氮原子赋予该化合物一定的碱性特征,在酸性流动相条件下可被有效质子化。 CAS编号 31898-75-6 对应的羧甲司坦杂质N1(Carbocisteine Impurity N1),是化学式为 C5H7NO3S 的药物杂质标准品,相对分子质量 161.18。 本品推荐用于有关物质检查的方法开发与验证,符合ICH Q3A/Q3B对药物杂质控制的指导原则。在系统适用性试验中,羧甲司坦杂质N1可作为HPLC分离度考察的标准品,确保色谱系统对主成分与相邻杂质的分离满足药典要求。在强制降解实验框架下,本品可用于鉴定特定降解产物,支持药物稳定性研究中的杂质谱完整表征。 本品定值报告包含以下质量控制信息: - 主成分含量:97%+; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNM
Carbocisteine Impurity N1 (CAS 31898-75-6) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C5H7NO3S, molecular weight 161.18 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
Carbocisteine Impurity N1 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
在药品质量控制和药物分析实验室中,羧甲司坦杂质N1(CAS 31898-75-6)凭借其97%+的纯度做为基础物质,为定量分析提供基准参照。 推荐分析方法: - HPLC-DAD/UV :使用C18反相色谱柱(4.6 × 250 mm, 5 μm),流动相推荐乙腈-磷酸盐缓冲液体系(pH调节至3.0 ± 0.1); - LC-MS/MS :采用ESI离子源,正/负离子模式选择取决于流动相组成,推荐MRM模式进行高灵敏度定量; - GC-FID/MS :适用于具有一定挥发性的成分,需通过衍生化或程序升温进行优化分离。 标准溶液配制建议 :精确称取羧甲司坦杂质N1适量(
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 白色至淡黄色结晶性粉末。(具有氨/胺类微弱气味,含硫化合物特征性气味) |
| 储存条件Storage | 2-8°C冷藏保存,避光,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙醇、DMSO、水 |
| 稳定性Stability | 空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射;具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 3.0 |
| UV特征UV Absorption | 有紫外吸收 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1966年 |
| 含氮原子数Nitrogen Atoms | 1 |
| 含硫原子数含硫原子数 | 1 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.