常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
卡格列净杂质59Canagliflozin Impurity 59CAS 号No. 32469-28-6
Canagliflozin Impurity 59
| CAS 号CAS No. | 32469-28-6 |
| 分子式Molecular Formula | C18H42O6Si4 |
| 分子量Molecular Weight | 466.9 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 >95% |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
卡格列净杂质59(Canagliflozin Impurity 59,CAS 号 32469-28-6)是 CATO 佳途自主生产的药物杂质对照品,分子式 C18H42O6Si4,分子量 466.86。纯度 >95%。本品采用严格的质量控制体系生产,附 COA 证书,适用于药物研发、质量控制和法规申报等场景。
依据分子式为 C18H42O6Si4 的卡格列净杂质59结构特征,其分子内含羧酸类,含羟基,含醚键,这意味着该化合物在红外光谱中会呈现特征性的官能团伸缩振动信号。分子量 466.86 g/mol 这一参数对质谱检测中的分子离子峰识别具有直接参考价值。 分子式为 C18H42O6Si4 的卡格列净杂质59(CAS 32469-28-6),作为药物杂质分析中常用的定量对照标准品,为行业实验室广泛采纳。 在定量分析中,卡格列净杂质59(纯度>95%)适用于: - 外标法定量原料药或制剂中特定杂质的含量; - 加标回收实验评估分析方法的准确度; - 检测限/定量限(LOD/LOQ)的测定验证方法灵敏度; - 在LC-MS/MS多反应监测(MRM)模式中作为校正标准品使用。 本品定值报告包含以下质量控制信息: - 主成分含量:>95%; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNMR法、DSC法等正交验证; - 不确定度:扩展不确定度(k=2)包含
Canagliflozin Impurity 59 (CAS 32469-28-6) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C18H42O6Si4, molecular weight 466.9 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
Canagliflozin Impurity 59 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
从实际应用出发,卡格列净杂质59(CAS 32469-28-6)在药品质量控制和药物分析中作为关键的基准对照物质。 法规符合性: 卡格列净杂质59作为药物杂质对照品,其质量控制策略需符合: - ICH Q3A :新原料药中的杂质限度要求; - ICH Q3B :新制剂产品中的降解产物限度要求; - USP <1086> :药物物质中的杂质(修订版); - EP 5.10 :杂质控制的要求。 如目标杂质含量超过鉴定限度(Identification Threshold),应进行结构确证。如超过认定限度(Qualification Threshold),需提供安全性数据
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 白色至类白色结晶性粉末 |
| 储存条件Storage | 室温保存,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙腈、DMSO、水(微溶) |
| 稳定性Stability | 在推荐条件下性质稳定 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | -2.0 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1966年 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.