CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
首页Home / 产品服务Products / 药物杂质对照品Impurity Reference Standards / 噻吗洛尔杂质8 (CAS 号 369377-82-2)Timolol Impurity 8 (CAS No. 369377-82-2)

噻吗洛尔杂质8Timolol Impurity 8CAS 号No. 369377-82-2

Timolol Impurity 8

>95%现货In stock药物杂质对照品Impurity Reference Standards
CAS 号CAS No.369377-82-2
分子式Molecular FormulaC15H22N6O5S2
分子量Molecular Weight430.5 g/mol
分类Category药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards
纯度Purity>95%
库存状态Stock现货 97%+
询价 / 索取 COAQuote / COA该品种全部杂质All impurities of this drug

化学结构式Chemical structure

Timolol Impurity 8 structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only

需要报价或 COA?Need a quote or COA?

直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.

提交在线询价Submit enquiry

产品介绍Product description

CAS 369377-82-2 对应的噻吗洛尔杂质8(噻吗洛尔杂质8)为 CATO 佳途药物杂质对照品产品线成员。分子式 C15H22N6O5S2,分子量 430.50。纯度 97%+。所有批次均经 HPLC/NMR 等多项检测确认,质量稳定可溯源。

噻吗洛尔杂质8的产生途径与其化学式中黄酮骨架,酰胺类,含砜基,含羟基,含醚键密切相关,该结构特征决定了其在合成/纯化或降解过程中出现的概率与行为。 噻吗洛尔杂质8(英文标识 噻吗洛尔杂质8)为化学结构经确证的药物有关物质,其CAS登记号为 369377-82-2,相对分子质量测定值为 430.50。 噻吗洛尔杂质8(C15H22N6O5S2)含有黄酮骨架,酰胺类,含砜基,含羟基,含醚键。具有较强的吸湿性,羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。由于结构中存在共轭发色团,该化合物在200-400 nm区间具有显著的紫外吸收,便于HPLC-UV检测。 本品推荐用于有关物质检查的方法开发与验证,符合ICH Q3A/Q3B对药物杂质控制的指导原则。在系统适用性试验中,噻吗洛尔杂质8可作为HPLC分离度考察的标准品,确保色谱系统对主成分与相邻杂质的分离满足药典要求。在强制降解实验框架下,本品可用于鉴定特定降解产物,支持药物稳定性研究中的杂质谱完整表征。 在质量保证方面,噻吗洛尔杂质8的生产和定值严格遵循ISO 1

Timolol Impurity 8 (CAS 369377-82-2) is supplied by CATO as impurity reference standards for analytical and quality-control use.

Molecular formula C15H22N6O5S2, molecular weight 430.5 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.

Timolol Impurity 8 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.

Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.

应用场景Application notes

噻吗洛尔杂质8(噻吗洛尔杂质8,CAS 369377-82-2)的标准化应用场景涵盖药品质量控制和药物分析等多个专业技术领域。 关键分析参数优化: - 检测波长 :254nm(可根据实际情况在210-280 nm范围内优化); - 柱温 :推荐30-35°C,确保保留时间重现性; - 进样量 :推荐10-20 μL,检测灵敏度不足时可适当增加; - 流速 :1.0 mL/min(4.6 mm内径色谱柱)或相应比例调整。 基质效应评估 :建议采用柱后注入法或提取后加入法评估基质效应,必要时采用基质匹配标准曲线或同位素内标克服基质干扰。 使用建议: -

Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.

Detailed recommended procedures are provided in the Chinese datasheet.

理化性质Physical & Chemical Properties

外观形态Appearance淡黄色至黄色结晶性粉末。(含硫化合物特征性气味)
储存条件Storage阴凉处(≤25°C)保存,避光,密封防潮
溶解性参考Solubility可溶于DMSO、DMF、甲醇
稳定性Stability空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射;具有吸湿性,开封后应立即密封
化合物类型Compound Type药物杂质对照品
子类Sub-classEP药典杂质
不饱和度(DBE)Unsaturation (DBE)8.0
UV特征UV Absorption有紫外吸收
结构特征Structural Features含芳环
CAS登记年份(估)CAS Reg. Year (est.)2025年
含氮原子数Nitrogen Atoms6
含硫原子数含硫原子数2

性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.

杂质信息与使用建议Impurity information and usage notes

以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.

典型用途Typical use

常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.

储存与操作Storage and handling

标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.

质量文件Quality documentation

随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.

杂质类型Impurity class

按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.

询价 / 索取 COARequest a quote / COA

提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.

常规规格Standard pack sizes现货In stock

同品种其他杂质Other impurities of this drug substance

查看「马来酸噻吗洛尔」全部杂质 →View all Timolol Maleate impurities →