常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
索拉菲尼杂质INT-2-LCAS 号No. 864272-34-3
| CAS 号CAS No. | 864272-34-3 |
| 分子式Molecular Formula | C14H14N2O2 |
| 分子量Molecular Weight | 242.27 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 97%+ |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
CAS 864272-34-3 对应的索拉菲尼杂质INT-2-L(索拉菲尼杂质INT-2-L)为 CATO 佳途药物杂质对照品产品线成员。分子式 C14H14N2O2,分子量 242.27。纯度 97%+。所有批次均经 HPLC/NMR 等多项检测确认,质量稳定可溯源。
本品定值报告包含以下质量控制信息: - 主成分含量:97%+; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNMR法、DSC法等正交验证; - 不确定度:扩展不确定度(k=2)包含测量重复性、均匀性和稳定性分量。 分子式为 C14H14N2O2 的索拉菲尼杂质INT-2-L(CAS 864272-34-3),作为药物杂质分析中常用的定量对照标准品,为行业实验室广泛采纳。 索拉菲尼杂质INT-2-L(C14H14N2O2)含有含氮杂环结构,酰胺类,含羟基,含醚键。具有较强的吸湿性,较高的碳氢比使其脂溶性较好,羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。分子中包含芳环或共轭体系,在UV-Vis光谱中具有特征性吸收带,适用于紫外或二极管阵列检测器(DAD)的定量分析。 在色谱分析方法开发中,索拉菲尼杂质INT-2-L(纯度97%+)可用于: - 确定相对保留时间(RRT),建立杂质定位参考点; - 计算相对响应因子(RRF)
索拉菲尼杂质INT-2-L (CAS 864272-34-3) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C14H14N2O2, molecular weight 242.27 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
索拉菲尼杂质INT-2-L is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
索拉菲尼杂质INT-2-L(索拉菲尼杂质INT-2-L,CAS 864272-34-3)的标准化应用场景涵盖药品质量控制和药物分析等多个专业技术领域。 法规符合性: 索拉菲尼杂质INT-2-L作为药物杂质对照品,其质量控制策略需符合: - ICH Q3A :新原料药中的杂质限度要求; - ICH Q3B :新制剂产品中的降解产物限度要求; - USP <1086> :药物物质中的杂质(修订版); - EP 5.10 :杂质控制的要求。 如目标杂质含量超过鉴定限度(Identification Threshold),应进行结构确证。如超过认定限度(Qualificat
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 淡黄色至黄色结晶性粉末 |
| 储存条件Storage | 2-8°C冷藏保存,避光,密封防潮 |
| 溶解性参考Solubility | 可溶于DMSO、DMF、甲醇 |
| 稳定性Stability | 空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射;具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 9.0 |
| UV特征UV Absorption | 有紫外吸收 |
| 结构特征Structural Features | 含芳环 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1987年 |
| 含氮原子数Nitrogen Atoms | 2 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.