CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
首页Home / 产品服务Products / 药物杂质对照品Impurity Reference Standards / 溴芬酸钠杂质D (CAS 号 98790-48-8)Bromfenac Sodium Impurity D (CAS No. 98790-48-8)

溴芬酸钠杂质DBromfenac Sodium Impurity DCAS 号No. 98790-48-8

Bromfenac Sodium Impurity D

>95%现货In stock药物杂质对照品Impurity Reference StandardsPubChem CID 13767309
CAS 号CAS No.98790-48-8
分子式Molecular FormulaC14H11NO3
分子量Molecular Weight241.24 g/mol
分类Category药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards
纯度Purity>95%
库存状态Stock现货 97%+
询价 / 索取 COAQuote / COA该品种全部杂质All impurities of this drug

化学结构式Chemical structure

Bromfenac Sodium Impurity D structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only

需要报价或 COA?Need a quote or COA?

直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.

提交在线询价Submit enquiry

产品介绍Product description

CAS 98790-48-8 对应的溴芬酸钠杂质D(溴芬酸钠杂质D)为 CATO 佳途药物杂质对照品产品线成员。分子式 C14H11NO3,分子量 241.24。纯度 97%+。所有批次均经 HPLC/NMR 等多项检测确认,质量稳定可溯源。

本品定值报告包含以下质量控制信息: - 主成分含量:97%+; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNMR法、DSC法等正交验证; - 不确定度:扩展不确定度(k=2)包含测量重复性、均匀性和稳定性分量。 在药品研发过程中,溴芬酸钠杂质D(溴芬酸钠杂质D,C14H11NO3)属于工艺相关杂质,其准确鉴定与定量对药品安全评估至关重要。 依据分子式为 C14H11NO3 的溴芬酸钠杂质D结构特征,其分子内含含氮杂环结构,酰胺类,含羟基,含醚键,这意味着该化合物在紫外光谱中会呈现特征性的吸收带。分子量 241.24 g/mol 这一参数对质谱检测中的分子离子峰识别具有直接参考价值。由于碳链较长,脂溶性良好,该化合物在Octanol-Water分配系数测试中倾向于有机相。 在色谱分析方法开发中,溴芬酸钠杂质D(纯度97%+)可用于: - 确定相对保留时间(RRT),建立杂质定位参考点; - 计算相对响应因子(RRF),评估检测器响应差异; - 验证梯度洗

Bromfenac Sodium Impurity D (CAS 98790-48-8) is supplied by CATO as impurity reference standards for analytical and quality-control use.

Molecular formula C14H11NO3, molecular weight 241.24 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.

Bromfenac Sodium Impurity D is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.

Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.

应用场景Application notes

溴芬酸钠杂质D(溴芬酸钠杂质D,CAS 98790-48-8)的标准化应用场景涵盖药品质量控制和药物分析等多个专业技术领域。 推荐应用流程: 1. 样品前处理 — 依据原料药或制剂特性,选择适当的提取和净化方法; 2. 色谱条件建立 — 以溴芬酸钠杂质D(纯度97%+)配制系统适用性溶液,验证分离度(Rs)不小于1.5; 3. 系统适用性 — 连续进样6针计算峰面积RSD,应不大于2.0%; 4. 定量流程 — 外标法或校正因子法计算目标杂质含量,结果以%面积报告。 质量控制要求:每批分析应包含空白、质控和双重分析(duplicate)以验证数据可靠性。

Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.

Detailed recommended procedures are provided in the Chinese datasheet.

理化性质Physical & Chemical Properties

外观形态Appearance淡黄色至黄色结晶性粉末
储存条件Storage2-8°C冷藏保存,避光,密封防潮
溶解性参考Solubility可溶于氯仿、二氯甲烷、乙酸乙酯、DMSO
稳定性Stability空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射;具有吸湿性,开封后应立即密封
化合物类型Compound Type药物杂质对照品
子类Sub-classEP药典杂质
不饱和度(DBE)Unsaturation (DBE)10.0
UV特征UV Absorption有紫外吸收
结构特征Structural Features含芳环
CAS登记年份(估)CAS Reg. Year (est.)1985年
含氮原子数Nitrogen Atoms1

性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.

结构标识Identifiers

SMILESC1=CC=C(C=C1)C(=O)C2=C(C(=CC=C2)C(=O)O)N
InChIKeyIZHBEYATINYYBL-UHFFFAOYSA-N
IUPAC Name2-amino-3-benzoylbenzoic acid

标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.

杂质信息与使用建议Impurity information and usage notes

以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.

典型用途Typical use

常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.

储存与操作Storage and handling

标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.

质量文件Quality documentation

随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.

杂质类型Impurity class

按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.

询价 / 索取 COARequest a quote / COA

提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.

常规规格Standard pack sizes现货In stock