CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
Bromazepam

溴西泮 杂质对照品Bromazepam Impurities

EP14 个杂质条目14 impurity entries

本页汇总 溴西泮 的 14 个杂质对照品条目,其中药典杂质标注了 EP/USP 编号。杂质谱是仿制药杂质研究、方法开发与稳定性考察的起点——先锁定品种,再逐条比对结构差异与保留行为。This page collects 14 impurity reference standards of Bromazepam with EP/USP numbering where applicable. The impurity profile is the starting point for related-substance method development, forced degradation and stability studies.

批量索取报价 / COABulk quote / COA在全站目录中检索Search the full catalogue

相关研究文献Related literature

以下为 溴西泮(Bromazepam)在公开文献中的研究报道(题录信息,来源 PubMed),供方法开发与文献调研参考。Selected peer-reviewed publications on this drug substance — bibliographic records from PubMed.

  1. 杂质研究Impurity studiesStability indicating spectrophotometric methods for quantitative determination of bromazepam and its degradation product
    Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy · 2020 · Darwish HW et al.  ·  PMID 32403074  ·  DOI
  2. 杂质研究Impurity studiesDevelopment and validation of a stability indicating RP-HPLC-DAD method for the determination of bromazepam
    PloS one · 2021 · Darwish HW et al.  ·  PMID 33690658  ·  DOI
  3. 杂质研究Impurity studiesComparison of CZE, MEKC, MEEKC and non-aqueous capillary electrophoresis for the determination of impurities in bromazepam
    Journal of pharmaceutical and biomedical analysis · 2005 · Hansen SH, Sheribah ZA  ·  PMID 15935599  ·  DOI
  4. 分析方法Analytical MethodsDevelopment and Validation of an Analytical Method for the Detection and Quantification of Bromazepam, Clonazepam and Diazepam by UPLC-MS/MS in Surface Water
    Bulletin of environmental contamination and toxicology · 2019 · de Araujo FG et al.  ·  PMID 31104081  ·  DOI
  5. 分析方法Analytical MethodsDevelopment and Validation of an LC-MS/MS Method for the Simultaneous Determination of Alprazolam, Bromazepam, Clonazepam, Diazepam and Flunitrazpam in Human Urine and Its Application to Samples from Suspected Drug Abusers
    Molecules (Basel, Switzerland) · 2025 · Kamal H et al.  ·  PMID 40941979  ·  DOI

溴西泮 —— 原料药与杂质对照品Bromazepam — drug substance & impurities

共 14 个条目(含原料药本体)14 items incl. the drug substance
Bromazepam Impurity 1 (Bromazepam EP Impurity A) structure
EPA
溴西泮杂质1 (溴西泮EP杂质A)Bromazepam Impurity 1 (Bromazepam EP Impurity A)
Bromazepam Impurity 1 (Bromazepam EP Impurity A)
CAS No.1563-56-0
Chemical FormulaC12H9BrN2O
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 2 (Bromazepam EP Impurity B) structure
EPB
溴西泮杂质2 (溴西泮EP杂质B)Bromazepam Impurity 2 (Bromazepam EP Impurity B)
Bromazepam Impurity 2 (Bromazepam EP Impurity B)
CAS No.41526-21-0
Chemical FormulaC14H10BrClN2O2
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 3 (Bromazepam EP Impurity C) structure
EPC
溴西泮杂质3 (溴西泮EP杂质C)Bromazepam Impurity 3 (Bromazepam EP Impurity C)
Bromazepam Impurity 3 (Bromazepam EP Impurity C)
CAS No.868350-97-4
Chemical FormulaC15H12BrN3O
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 4 (Bromazepam EP Impurity D) structure
EPD
溴西泮杂质4 (溴西泮EP杂质D)Bromazepam Impurity 4 (Bromazepam EP Impurity D)
Bromazepam Impurity 4 (Bromazepam EP Impurity D)
CAS No.77616-97-8
Chemical FormulaC14H10BrN3O
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 5 (Bromazepam EP Impurity E) structure
EPE
溴西泮杂质5 (溴西泮EP杂质E)Bromazepam Impurity 5 (Bromazepam EP Impurity E)
Bromazepam Impurity 5 (Bromazepam EP Impurity E)
CAS No.1694-64-0
Chemical FormulaC14H10Br2N2O2
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 1-d4 (Bromazepam EP Impurity A-d4) structure
EPA-D4
溴西泮杂质1-d4 (溴西泮EP杂质A-d4)Bromazepam Impurity 1-d4 (Bromazepam EP Impurity A-d4)
Bromazepam Impurity 1-d4 (Bromazepam EP Impurity A-d4)
CAS No.1246820-98-3
Chemical FormulaC12H5D4BrN2O
Purity>95%询价On request
Bromazepam Impurity 6 structure
6
溴西泮杂质6Bromazepam Impurity 6
Bromazepam Impurity 6
CAS No.1694-67-3
Chemical FormulaC14H10BrN3O2
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 7 structure
7
溴西泮杂质7Bromazepam Impurity 7
Bromazepam Impurity 7
CAS No.13132-73-5
Chemical FormulaC14H10BrN3O2
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 8 structure
8
溴西泮杂质8Bromazepam Impurity 8
Bromazepam Impurity 8
CAS No.13132-88-2
Chemical FormulaC16H12BrN3O3
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 10 structure
10
溴西泮杂质10Bromazepam Impurity 10
Bromazepam Impurity 10
CAS No.1812-33-5
Chemical FormulaC15H12BrN3O
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 11 structure
11
溴西泮杂质11Bromazepam Impurity 11
Bromazepam Impurity 11
CAS No.42471-56-7
Chemical FormulaC12H10N2O
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 12 structure
12
溴西泮杂质12Bromazepam Impurity 12
Bromazepam Impurity 12
CAS No.40951-53-9
Chemical FormulaC12H9BrN2O2
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 13 structure
13
溴西泮杂质13Bromazepam Impurity 13
Bromazepam Impurity 13
CAS No.1798043-23-8
Chemical FormulaC13H11BrN2O
Purity>95%询价On request
10mg25mg50mg100mg
Bromazepam Impurity 7-d4 structure
7-D4
溴西泮杂质7-d4Bromazepam Impurity 7-d4
Bromazepam Impurity 7-d4
CAS No.1246819-39-5
Chemical FormulaC14H6D4BrN3O2
Purity>95%询价On request

结构式清晰度以随货 COA 与厂家图谱为准;目录之外的杂质可按需定制合成或调取。Structural confirmation is governed by the COA and manufacturer spectra. Impurities outside this list can be custom-synthesised or sourced on request.

Literature & synthesis

溴西泮 —— 研究文献与合成路线Bromazepam — literature & synthetic routes

以下题录由公开学术数据库按品种名检索汇总,供 溴西泮 的杂质谱研究、分析方法开发与工艺路线选择参考。文献题名与专利标题均可点击查看原文,版权归原作者与出版方所有。Citations below are aggregated from public scholarly databases by drug-substance name, for reference in impurity profiling, analytical method development and route selection for Bromazepam. Titles link to the original records; copyright remains with the authors and publishers.

杂质与降解研究文献Impurity & degradation studies

  1. Stability indicating spectrophotometric methods for quantitative determination of bromazepam and its degradation product
    Darwish HW, A Ali N, Naguib IA, et al. · Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy · 2020 · 被引 5cited 5
  2. Development and validation of a stability indicating RP-HPLC-DAD method for the determination of bromazepam
    Darwish HW, Ali NA, Naguib IA, et al. · PloS one · 2021 · 被引 6cited 6
  3. Comparison of CZE, MEKC, MEEKC and non-aqueous capillary electrophoresis for the determination of impurities in bromazepam
    Hansen SH, Sheribah ZA · Journal of pharmaceutical and biomedical analysis · 2005 · 被引 20cited 20
  4. Acidic hydrolysis of bromazepam studied by high performance liquid chromatography. Isolation and identification of its degradation products
    Panderi I, Panderi I, Archontaki H, et al. · Journal of pharmaceutical and biomedical analysis · 1998 · 被引 11cited 11
  5. Degradation of bromazepam by the intestinal microflora
    Fujii J, Inotsume N, Nakano M · Chemical & pharmaceutical bulletin · 1987 · 被引 9cited 9

题录与链接来自公开数据库 Europe PMC(含 PubMed 与全球专利题录)与 WIPO PatentScope,本站仅提供索引,不转载正文;如链接失效请以数据库检索为准。Citations are indexed from public databases (Europe PMC incl. PubMed and patent records, WIPO PatentScope); we provide links only and do not reproduce full text.

For formulation & analytical R&D

溴西泮 杂质谱研究要点Bromazepam — impurity profiling notes

下面这些是拿到 溴西泮 的 14 个杂质条目之后,仿制药研发最常遇到的几件事。先把杂质的来源分清,再决定要不要买对照品、买哪几个。Once you have the 14 impurity entries for Bromazepam, these are the questions that come up most in generic development. Classify the source of each impurity first, then decide which reference standards you actually need.

01工艺杂质Process impurities

起始物料、中间体、副产物、催化剂与溶剂残留。多来自合成路线本身,应在工艺开发阶段用加标试验定位。Starting materials, intermediates, by-products, catalysts and residual solvents — traced back to the synthetic route and located with spiking studies during process development.

02降解杂质Degradation impurities

水解、氧化、光解、高温高湿与聚合产物。需通过强制降解试验识别,并确认方法具备稳定性指示能力。Hydrolytic, oxidative, photolytic, thermal and polymeric degradants — identified through forced degradation, with the method proven stability-indicating.

03药典杂质Pharmacopoeial impurities

EP/USP 已收载并有官方编号的杂质(如 EP Impurity A、USP Related Compound B)。申报时通常需逐项对照。Impurities already monographed with official designations (e.g. EP Impurity A, USP Related Compound B), normally compared item by item during filing.

04基因毒性杂质Genotoxic impurities

含警示结构、需按 ICH M7 进行危害评估与限度推导(TTC 1.5 µg/日)。该类杂质必须用对照品准确控制。Structurally alerting compounds requiring ICH M7 hazard assessment and limit derivation (TTC 1.5 µg/day); these must be controlled with an authentic reference standard.

05同位素标记物Isotopically labelled standards

氘代、¹³C、¹⁵N 标记的同类物,主要用作 LC-MS/MS 生物分析的内标,抵消基质效应与回收率波动。Deuterated, ¹³C- and ¹⁵N-labelled analogues used as internal standards in LC-MS/MS bioanalysis to compensate matrix effects and recovery variation.

06代谢与转化产物Metabolites & conversion products

体内代谢物、强制降解转化物与工艺中间态,常见于杂质谱比对与稳定性考察中。In-vivo metabolites, forced-degradation products and process intermediates encountered in impurity profiling and stability studies.

本品种含药典编号杂质(EP/USP)。申报时药典已收载的杂质通常需要逐项对照,建议优先备齐药典编号对照品,再补充工艺与降解杂质。This drug substance includes pharmacopoeially designated impurities (EP/USP). Monographed impurities normally need item-by-item comparison during filing, so secure the pharmacopoeial standards first, then fill in process and degradation impurities.

方法开发与对照品使用建议Method development and standards usage

先定分离,再谈定量Resolution first, then quantification

主成分与相邻杂质峰分离度应 ≥1.5;用杂质对照品确定相对保留时间与相对响应因子,避免用自身对照法掩盖响应差异。Target baseline resolution ≥1.5 between the main component and adjacent impurities; establish relative retention and relative response factors with authentic impurity standards rather than relying on self-comparison.

校正因子不可忽略Never ignore response factors

紫外吸收差异大的杂质必须校正,否则定量结果系统性偏低或偏高。EP/USP 已给出校正因子的按药典执行。Impurities with markedly different UV response need correction, otherwise results are systematically biased. Where EP/USP publish a correction factor, follow the monograph.

强制降解要做全Run the full forced-degradation panel

建议覆盖酸、碱、氧化(H₂O₂)、光照(ICH Q1B)、高温高湿;主峰纯度用二极管阵列或质谱确认。Cover acid, base, peroxide oxidation, photostability (ICH Q1B) and heat/humidity; confirm peak purity by DAD or MS.

定义报告阈值Set reporting and identification thresholds

按 ICH Q3A/Q3B 设定报告阈值、鉴定阈值与界定阈值,避免为无意义的峰投入过多工作量。Apply ICH Q3A/Q3B reporting, identification and qualification thresholds so effort is not spent on insignificant peaks.

标准品储存有讲究Store standards properly

杂质对照品多建议 −20 ℃ 避光、干燥、密封保存;溶液现配现用,并记录开瓶与配制日期。Most impurity standards should be stored at −20 °C, protected from light and moisture; prepare solutions fresh and record opening and preparation dates.

用结构式先做初判Start from the structure

先比对杂质与主成分的结构差异,可预判其保留行为、紫外响应与可能的降解路径,能显著减少试错。Comparing the impurity structure with the parent drug predicts retention behaviour, UV response and probable degradation routes, cutting trial and error.

以上为通行的杂质研究实践提示,不针对具体品种给出结论。实际限度、校正因子与色谱条件请以 EP/USP 各论及你们的验证数据为准。需要某个杂质的结构确证资料、COA 或定制合成,可直接联系我们。The above are general impurity-profiling notes and are not conclusions about this specific drug substance. Actual limits, correction factors and chromatographic conditions follow the EP/USP monograph and your own validation data. Contact us for structural confirmation data, COAs or custom synthesis.
索取杂质谱报价 / COARequest a quote / COA← 查看其它品种← Other drug substances