来曲唑 杂质对照品Letrozole Impurities
本页汇总 来曲唑 的 25 个杂质对照品条目。杂质谱是仿制药杂质研究、方法开发与稳定性考察的起点——先锁定品种,再逐条比对结构差异与保留行为。This page collects 25 impurity reference standards of Letrozole. The impurity profile is the starting point for related-substance method development, forced degradation and stability studies.
相关研究文献Related literature
以下为 来曲唑(Letrozole)在公开文献中的研究报道(题录信息,来源 PubMed),供方法开发与文献调研参考。Selected peer-reviewed publications on this drug substance — bibliographic records from PubMed.
- 杂质研究Impurity studiesStability-indicating spectrophotometric manipulations for the determination of Letrozole in the presence of its alkali-induced degradation products; towards whiteness and ChlorTox scale perspectives
BMC chemistry · 2025 · El-Fatah NAA et al. · PMID 40057722 · DOI - 杂质研究Impurity studiesIdentification of related substances in letrozole using LC-Q-TOF/MS
Journal of pharmaceutical and biomedical analysis · 2025 · Hu ZL et al. · PMID 40479786 · DOI - 杂质研究Impurity studiesPreparation and characterization of two new forced degradation products of letrozole and development of a stability-indicating RP-LC method for its determination
Pakistan journal of pharmaceutical sciences · 2015 · Elkady EF, Fouad MA · PMID 26639498 - 分析方法Analytical MethodsDevelopment and Validation of a Novel LC-MS/MS Method for the Simultaneous Determination of Abemaciclib, Palbociclib, Ribociclib, Anastrozole, Letrozole, and Fulvestrant in Plasma Samples: A Prerequisite for Personalized Breast Cancer Treatment
Pharmaceuticals (Basel, Switzerland) · 2022 · Turković L et al. · PMID 35631440 · DOI - 分析方法Analytical MethodsSimultaneous quantification of abemaciclib and letrozole in rat plasma: method development, validation and pharmacokinetic application
Biomedical chromatography : BMC · 2020 · Dhakne P et al. · PMID 32166756 · DOI
来曲唑 —— 研究文献与合成路线Letrozole — literature & synthetic routes
以下题录由公开学术数据库按品种名检索汇总,供 来曲唑 的杂质谱研究、分析方法开发与工艺路线选择参考。文献题名与专利标题均可点击查看原文,版权归原作者与出版方所有。Citations below are aggregated from public scholarly databases by drug-substance name, for reference in impurity profiling, analytical method development and route selection for Letrozole. Titles link to the original records; copyright remains with the authors and publishers.
杂质与降解研究文献Impurity & degradation studies
- Preparation and characterization of two new forced degradation products of letrozole and development of a stability-indicating RP-LC method for its determination
- Stability-indicating spectrophotometric manipulations for the determination of Letrozole in the presence of its alkali-induced degradation products; towards whiteness and ChlorTox scale perspectives
- Interaction of letrozole and its degradation products with aromatase: chemometric assessment of kinetics and structure-based binding validation
- Stability-indicating liquid chromatographic method for the determination of Letrozole in pharmaceutical formulations
- Spectrophotometric methods for the determination of letrozole in bulk and pharmaceutical dosage forms
- Synthesis and characterization of poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] grafted to magnetic nano-particles for extraction and determination of letrozole in biological and pharmaceutical samples
合成与制备工艺专利Synthesis & process patents
- REGIOSELECTIVE SYNTHESIS OF LETROZOLE
- PROCESS AND INTERMEDIATE OF LETROZOLE
- PROCESS FOR THE PREPARATION OF LETROZOLE
- PROCESS FOR THE PREPARATION OF LETROZOLE
- PROCESS FOR PREPARATION OF LETROZOLE AND ITS INTERMEDIATES
题录与链接来自公开数据库 Europe PMC(含 PubMed 与全球专利题录)与 WIPO PatentScope,本站仅提供索引,不转载正文;如链接失效请以数据库检索为准。Citations are indexed from public databases (Europe PMC incl. PubMed and patent records, WIPO PatentScope); we provide links only and do not reproduce full text.
来曲唑 杂质谱研究要点Letrozole — impurity profiling notes
下面这些是拿到 来曲唑 的 25 个杂质条目之后,仿制药研发最常遇到的几件事。先把杂质的来源分清,再决定要不要买对照品、买哪几个。Once you have the 25 impurity entries for Letrozole, these are the questions that come up most in generic development. Classify the source of each impurity first, then decide which reference standards you actually need.
01工艺杂质Process impurities
起始物料、中间体、副产物、催化剂与溶剂残留。多来自合成路线本身,应在工艺开发阶段用加标试验定位。Starting materials, intermediates, by-products, catalysts and residual solvents — traced back to the synthetic route and located with spiking studies during process development.
02降解杂质Degradation impurities
水解、氧化、光解、高温高湿与聚合产物。需通过强制降解试验识别,并确认方法具备稳定性指示能力。Hydrolytic, oxidative, photolytic, thermal and polymeric degradants — identified through forced degradation, with the method proven stability-indicating.
03药典杂质Pharmacopoeial impurities
EP/USP 已收载并有官方编号的杂质(如 EP Impurity A、USP Related Compound B)。申报时通常需逐项对照。Impurities already monographed with official designations (e.g. EP Impurity A, USP Related Compound B), normally compared item by item during filing.
04基因毒性杂质Genotoxic impurities
含警示结构、需按 ICH M7 进行危害评估与限度推导(TTC 1.5 µg/日)。该类杂质必须用对照品准确控制。Structurally alerting compounds requiring ICH M7 hazard assessment and limit derivation (TTC 1.5 µg/day); these must be controlled with an authentic reference standard.
05同位素标记物Isotopically labelled standards
氘代、¹³C、¹⁵N 标记的同类物,主要用作 LC-MS/MS 生物分析的内标,抵消基质效应与回收率波动。Deuterated, ¹³C- and ¹⁵N-labelled analogues used as internal standards in LC-MS/MS bioanalysis to compensate matrix effects and recovery variation.
06代谢与转化产物Metabolites & conversion products
体内代谢物、强制降解转化物与工艺中间态,常见于杂质谱比对与稳定性考察中。In-vivo metabolites, forced-degradation products and process intermediates encountered in impurity profiling and stability studies.
方法开发与对照品使用建议Method development and standards usage
主成分与相邻杂质峰分离度应 ≥1.5;用杂质对照品确定相对保留时间与相对响应因子,避免用自身对照法掩盖响应差异。Target baseline resolution ≥1.5 between the main component and adjacent impurities; establish relative retention and relative response factors with authentic impurity standards rather than relying on self-comparison.
紫外吸收差异大的杂质必须校正,否则定量结果系统性偏低或偏高。EP/USP 已给出校正因子的按药典执行。Impurities with markedly different UV response need correction, otherwise results are systematically biased. Where EP/USP publish a correction factor, follow the monograph.
建议覆盖酸、碱、氧化(H₂O₂)、光照(ICH Q1B)、高温高湿;主峰纯度用二极管阵列或质谱确认。Cover acid, base, peroxide oxidation, photostability (ICH Q1B) and heat/humidity; confirm peak purity by DAD or MS.
按 ICH Q3A/Q3B 设定报告阈值、鉴定阈值与界定阈值,避免为无意义的峰投入过多工作量。Apply ICH Q3A/Q3B reporting, identification and qualification thresholds so effort is not spent on insignificant peaks.
杂质对照品多建议 −20 ℃ 避光、干燥、密封保存;溶液现配现用,并记录开瓶与配制日期。Most impurity standards should be stored at −20 °C, protected from light and moisture; prepare solutions fresh and record opening and preparation dates.
先比对杂质与主成分的结构差异,可预判其保留行为、紫外响应与可能的降解路径,能显著减少试错。Comparing the impurity structure with the parent drug predicts retention behaviour, UV response and probable degradation routes, cutting trial and error.
























