CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
Tertatolol

特他洛尔 杂质对照品Tertatolol Impurities

10 个杂质条目10 impurity entries

本页汇总 特他洛尔 的 10 个杂质对照品条目。杂质谱是仿制药杂质研究、方法开发与稳定性考察的起点——先锁定品种,再逐条比对结构差异与保留行为。This page collects 10 impurity reference standards of Tertatolol. The impurity profile is the starting point for related-substance method development, forced degradation and stability studies.

批量索取报价 / COABulk quote / COA在全站目录中检索Search the full catalogue

相关研究文献Related literature

以下为 特他洛尔(Tertatolol)在公开文献中的研究报道(题录信息,来源 PubMed),供方法开发与文献调研参考。Selected peer-reviewed publications on this drug substance — bibliographic records from PubMed.

  1. 分析方法Analytical MethodsStereoselective HPLC analysis of tertatolol in rat plasma using macrocyclic antibiotic chiral stationary phase
    Chirality · 2011 · Hefnawy MM et al.  ·  PMID 21384438  ·  DOI
  2. 分析方法Analytical MethodsSimultaneous quantitative determination of tertatolol and its hydroxylated metabolite in human plasma and urine by gas chromatography-mass spectrometry
    Journal of chromatography · 1987 · Efthymiopoulos C et al.  ·  PMID 2892852  ·  DOI
  3. 分析方法Analytical MethodsDetermination of tertatolol enantiomers in biological fluids by high-performance liquid chromatography
    Journal of chromatography · 1991 · Lave T et al.  ·  PMID 1687817  ·  DOI
  4. 分析方法Analytical MethodsQuantitative determination of tertatolol in biological fluids by gas chromatography-mass spectrometry
    Journal of chromatography · 1985 · Staveris S et al.  ·  PMID 2862155  ·  DOI

特他洛尔 —— 原料药与杂质对照品Tertatolol — drug substance & impurities

共 11 个条目(含原料药本体)11 items incl. the drug substance
Tertatolol structure
原料药 APIAPI
特他洛尔Tertatolol
Tertatolol
CAS No.83688-84-0
Chemical FormulaC16H25NO2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 1 structure
1
特他洛尔杂质1Tertatolol Impurity 1
Tertatolol Impurity 1
CAS No.117305-34-7
Chemical FormulaC16H25NO2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 2 structure
2
特他洛尔杂质2Tertatolol Impurity 2
Tertatolol Impurity 2
CAS No.116127-10-7
Chemical FormulaC16H25NO2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 3 structure
3
特他洛尔杂质3Tertatolol Impurity 3
Tertatolol Impurity 3
CAS No.153804-64-9
Chemical FormulaC21H27NO2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 4 structure
4
特他洛尔杂质4Tertatolol Impurity 4
Tertatolol Impurity 4
CAS No.111897-93-9
Chemical FormulaC17H27NO3S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 5 structure
5
特他洛尔杂质5Tertatolol Impurity 5
Tertatolol Impurity 5
CAS No.153804-63-8
Chemical FormulaC22H29NO2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 6 structure
6
特他洛尔杂质6Tertatolol Impurity 6
Tertatolol Impurity 6
CAS No.34784-62-8
Chemical FormulaC15H23NO2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 7 structure
7
特他洛尔杂质7Tertatolol Impurity 7
Tertatolol Impurity 7
CAS No.109140-19-4
Chemical FormulaC10H13NOS
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 8 structure
8
特他洛尔杂质8Tertatolol Impurity 8
Tertatolol Impurity 8
CAS No.13735-11-0
Chemical FormulaC10H10O2S
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 9 structure
9
特他洛尔杂质9Tertatolol Impurity 9
Tertatolol Impurity 9
CAS No.30073-50-8
Chemical FormulaC9H10OS
Purity>95%询价On request
10mg25mg50mg100mg
Tertatolol Impurity 10 structure
10
特他洛尔杂质10Tertatolol Impurity 10
Tertatolol Impurity 10
CAS No.85392-02-5
Chemical FormulaC12H14O2S
Purity>95%询价On request
10mg25mg50mg100mg

结构式清晰度以随货 COA 与厂家图谱为准;目录之外的杂质可按需定制合成或调取。Structural confirmation is governed by the COA and manufacturer spectra. Impurities outside this list can be custom-synthesised or sourced on request.

For formulation & analytical R&D

特他洛尔 杂质谱研究要点Tertatolol — impurity profiling notes

下面这些是拿到 特他洛尔 的 11 个杂质条目之后,仿制药研发最常遇到的几件事。先把杂质的来源分清,再决定要不要买对照品、买哪几个。Once you have the 11 impurity entries for Tertatolol, these are the questions that come up most in generic development. Classify the source of each impurity first, then decide which reference standards you actually need.

01工艺杂质Process impurities

起始物料、中间体、副产物、催化剂与溶剂残留。多来自合成路线本身,应在工艺开发阶段用加标试验定位。Starting materials, intermediates, by-products, catalysts and residual solvents — traced back to the synthetic route and located with spiking studies during process development.

02降解杂质Degradation impurities

水解、氧化、光解、高温高湿与聚合产物。需通过强制降解试验识别,并确认方法具备稳定性指示能力。Hydrolytic, oxidative, photolytic, thermal and polymeric degradants — identified through forced degradation, with the method proven stability-indicating.

03药典杂质Pharmacopoeial impurities

EP/USP 已收载并有官方编号的杂质(如 EP Impurity A、USP Related Compound B)。申报时通常需逐项对照。Impurities already monographed with official designations (e.g. EP Impurity A, USP Related Compound B), normally compared item by item during filing.

04基因毒性杂质Genotoxic impurities

含警示结构、需按 ICH M7 进行危害评估与限度推导(TTC 1.5 µg/日)。该类杂质必须用对照品准确控制。Structurally alerting compounds requiring ICH M7 hazard assessment and limit derivation (TTC 1.5 µg/day); these must be controlled with an authentic reference standard.

05同位素标记物Isotopically labelled standards

氘代、¹³C、¹⁵N 标记的同类物,主要用作 LC-MS/MS 生物分析的内标,抵消基质效应与回收率波动。Deuterated, ¹³C- and ¹⁵N-labelled analogues used as internal standards in LC-MS/MS bioanalysis to compensate matrix effects and recovery variation.

06代谢与转化产物Metabolites & conversion products

体内代谢物、强制降解转化物与工艺中间态,常见于杂质谱比对与稳定性考察中。In-vivo metabolites, forced-degradation products and process intermediates encountered in impurity profiling and stability studies.

方法开发与对照品使用建议Method development and standards usage

先定分离,再谈定量Resolution first, then quantification

主成分与相邻杂质峰分离度应 ≥1.5;用杂质对照品确定相对保留时间与相对响应因子,避免用自身对照法掩盖响应差异。Target baseline resolution ≥1.5 between the main component and adjacent impurities; establish relative retention and relative response factors with authentic impurity standards rather than relying on self-comparison.

校正因子不可忽略Never ignore response factors

紫外吸收差异大的杂质必须校正,否则定量结果系统性偏低或偏高。EP/USP 已给出校正因子的按药典执行。Impurities with markedly different UV response need correction, otherwise results are systematically biased. Where EP/USP publish a correction factor, follow the monograph.

强制降解要做全Run the full forced-degradation panel

建议覆盖酸、碱、氧化(H₂O₂)、光照(ICH Q1B)、高温高湿;主峰纯度用二极管阵列或质谱确认。Cover acid, base, peroxide oxidation, photostability (ICH Q1B) and heat/humidity; confirm peak purity by DAD or MS.

定义报告阈值Set reporting and identification thresholds

按 ICH Q3A/Q3B 设定报告阈值、鉴定阈值与界定阈值,避免为无意义的峰投入过多工作量。Apply ICH Q3A/Q3B reporting, identification and qualification thresholds so effort is not spent on insignificant peaks.

标准品储存有讲究Store standards properly

杂质对照品多建议 −20 ℃ 避光、干燥、密封保存;溶液现配现用,并记录开瓶与配制日期。Most impurity standards should be stored at −20 °C, protected from light and moisture; prepare solutions fresh and record opening and preparation dates.

用结构式先做初判Start from the structure

先比对杂质与主成分的结构差异,可预判其保留行为、紫外响应与可能的降解路径,能显著减少试错。Comparing the impurity structure with the parent drug predicts retention behaviour, UV response and probable degradation routes, cutting trial and error.

以上为通行的杂质研究实践提示,不针对具体品种给出结论。实际限度、校正因子与色谱条件请以 EP/USP 各论及你们的验证数据为准。需要某个杂质的结构确证资料、COA 或定制合成,可直接联系我们。The above are general impurity-profiling notes and are not conclusions about this specific drug substance. Actual limits, correction factors and chromatographic conditions follow the EP/USP monograph and your own validation data. Contact us for structural confirmation data, COAs or custom synthesis.
索取杂质谱报价 / COARequest a quote / COA← 查看其它品种← Other drug substances