常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
鲁拉西酮杂质33Lurasidone Impurity 33CAS 号No. 114030-19-2
Lurasidone Impurity 33
| CAS 号CAS No. | 114030-19-2 |
| 分子式Molecular Formula | C9H9NO3 |
| 分子量Molecular Weight | 179.17 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 >95% |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
鲁拉西酮杂质33(Lurasidone Impurity 33,CAS 号 114030-19-2)是 CATO 佳途自主生产的药物杂质对照品,分子式 C9H9NO3,分子量 179.17。纯度 >95%。本品采用严格的质量控制体系生产,附 COA 证书,适用于药物研发、质量控制和法规申报等场景。
在现行药典和法规框架下,药物杂质对照品的合规要求中明确涉及对包括鲁拉西酮杂质33在内的目标物的控制。 作为药物质量控制的关键分析对照品,鲁拉西酮杂质33(Lurasidone Impurity 33)的系统命名为鲁拉西酮杂质33,CAS号 114030-19-2,分子量为 179.17 g/mol。 鲁拉西酮杂质33(C9H9NO3)含有氨基酸衍生物,酰胺类,含羟基,含醚键。具有较强的吸湿性,羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。由于结构中存在共轭发色团,该化合物在200-400 nm区间具有显著的紫外吸收,便于HPLC-UV检测。 在定量分析中,鲁拉西酮杂质33(纯度>95%)适用于: - 外标法定量原料药或制剂中特定杂质的含量; - 加标回收实验评估分析方法的准确度; - 检测限/定量限(LOD/LOQ)的测定验证方法灵敏度; - 在LC-MS/MS多反应监测(MRM)模式中作为校正标准品使用。 在质量保证方面,鲁拉西酮杂质33的生产和定值严格遵循ISO 17034:2016(认证标准物质
Lurasidone Impurity 33 (CAS 114030-19-2) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C9H9NO3, molecular weight 179.17 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
Lurasidone Impurity 33 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
鲁拉西酮杂质33(Lurasidone Impurity 33,CAS 114030-19-2)的标准化应用场景涵盖药品质量控制和药物分析等多个专业技术领域。 推荐应用流程: 1. 样品前处理 — 依据原料药或制剂特性,选择适当的提取和净化方法; 2. 色谱条件建立 — 以鲁拉西酮杂质33(纯度>95%)配制系统适用性溶液,验证分离度(Rs)不小于1.5; 3. 系统适用性 — 连续进样6针计算峰面积RSD,应不大于2.0%; 4. 定量流程 — 外标法或校正因子法计算目标杂质含量,结果以%面积报告。 质量控制要求:每批分析应包含空白、质控和双重分析(dup
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 类白色至淡黄色结晶性粉末。(具有氨/胺类微弱气味) |
| 储存条件Storage | 2-8°C冷藏保存,避光,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙醇、DMSO |
| 稳定性Stability | 空气中长期暴露可能发生缓慢氧化;对光敏感,应避免强光直射;具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 6.0 |
| UV特征UV Absorption | 有紫外吸收 |
| 结构特征Structural Features | 含芳环 |
| CAS登记年份(估)CAS Reg. Year (est.) | 1989年 |
| 含氮原子数Nitrogen Atoms | 1 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.
同品种其他杂质Other impurities of this drug substance
查看「盐酸鲁拉西酮」全部杂质 →View all Lurasidone Hydrochloride impurities →