常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
鲁拉西酮杂质40Lurasidone Impurity 40CAS 号No. 186204-35-3
Lurasidone Impurity 40
| CAS 号CAS No. | 186204-35-3 |
| 分子式Molecular Formula | C10H20O6S2 |
| 分子量Molecular Weight | 300.4 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 >95% |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
鲁拉西酮杂质40(Lurasidone Impurity 40)是药物分析与质量控制领域常用的药物杂质对照品,CAS 号 186204-35-3。分子式 C10H20O6S2,分子量 300.39。纯度 >95%。CATO 佳途拥有 130,000+ 标准品现货目录,可一站式满足配套采购需求。
鲁拉西酮杂质40的产生途径与其化学式中含砜基,羧酸类,含羟基,含醚键密切相关,该结构特征决定了其在合成/纯化或降解过程中出现的概率与行为。 分子式为 C10H20O6S2 的鲁拉西酮杂质40(CAS 186204-35-3),作为药物杂质分析中常用的定量对照标准品,为行业实验室广泛采纳。 鲁拉西酮杂质40(C10H20O6S2)含有含砜基,羧酸类,含羟基,含醚键。具有较强的吸湿性,羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。 在色谱分析方法开发中,鲁拉西酮杂质40(纯度>95%)可用于: - 确定相对保留时间(RRT),建立杂质定位参考点; - 计算相对响应因子(RRF),评估检测器响应差异; - 验证梯度洗脱程序的重现性和耐用性; - 考察色谱柱批次间分离效果的一致性。 作为认证标准物质(CRM),鲁拉西酮杂质40满足CNAS-CL04(ISO/IEC 17025)对标准物质的计量溯源性要求。批间一致性通过控制图(Control Chart)进行持续监控,保证不同批次间量值的一致性。
Lurasidone Impurity 40 (CAS 186204-35-3) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C10H20O6S2, molecular weight 300.4 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
Lurasidone Impurity 40 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
鲁拉西酮杂质40(Lurasidone Impurity 40)作为药物杂质对照品,在药品质量控制和药物分析分析领域承担着重要的角色。 推荐分析方法: - HPLC-DAD/UV :使用C18反相色谱柱(4.6 × 250 mm, 5 μm),流动相推荐乙腈-磷酸盐缓冲液体系(pH调节至3.0 ± 0.1); - LC-MS/MS :采用ESI离子源,正/负离子模式选择取决于流动相组成,推荐MRM模式进行高灵敏度定量; - GC-FID/MS :适用于具有一定挥发性的成分,需通过衍生化或程序升温进行优化分离。 标准溶液配制建议 :精确称取鲁拉西酮杂质40适量(精度0
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 白色至类白色结晶性粉末。(含硫化合物特征性气味) |
| 储存条件Storage | 阴凉处(≤25°C)保存,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙醇、DMSO |
| 稳定性Stability | 具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 1.0 |
| CAS登记年份(估)CAS Reg. Year (est.) | 2010年 |
| 含硫原子数含硫原子数 | 2 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.
同品种其他杂质Other impurities of this drug substance
查看「盐酸鲁拉西酮」全部杂质 →View all Lurasidone Hydrochloride impurities →