CATO 佳途CATO · CNAS + ANAB ISO 17034 双体系认可标准物质生产者CNAS + ANAB ISO 17034 dual-accredited reference material producer
销售顾问Sales contact 卢振明Kaka Lu+86 185 2048 1969kaka@cato-chem.com
首页Home / 产品服务Products / 药物杂质对照品Impurity Reference Standards / 鲁拉西酮杂质41 (CAS 号 3205-34-3)Lurasidone Impurity 41 (CAS No. 3205-34-3)

鲁拉西酮杂质41Lurasidone Impurity 41CAS 号No. 3205-34-3

Lurasidone Impurity 41

>95%现货In stock药物杂质对照品Impurity Reference StandardsPubChem CID 10678373
CAS 号CAS No.3205-34-3
分子式Molecular FormulaC8H16O2
分子量Molecular Weight144.21 g/mol
分类Category药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards
纯度Purity>95%
库存状态Stock现货 >95%
询价 / 索取 COAQuote / COA该品种全部杂质All impurities of this drug

化学结构式Chemical structure

Lurasidone Impurity 41 structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only

需要报价或 COA?Need a quote or COA?

直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.

提交在线询价Submit enquiry

产品介绍Product description

CAS 3205-34-3 对应的鲁拉西酮杂质41(Lurasidone Impurity 41)为 CATO 佳途药物杂质对照品产品线成员。分子式 C8H16O2,分子量 144.21。纯度 >95%。所有批次均经 HPLC/NMR 等多项检测确认,质量稳定可溯源。

鲁拉西酮杂质41(英文标识 Lurasidone Impurity 41)为化学结构经确证的药物有关物质,其CAS登记号为 3205-34-3,相对分子质量测定值为 144.21。 鲁拉西酮杂质41(C8H16O2)含有羧酸类,含羟基,含醚键。羧基赋予其一定的酸性特征,这些物理化学性质直接决定了其标准溶液的最佳配制方案和储存策略。 在定量分析中,鲁拉西酮杂质41(纯度>95%)适用于: - 外标法定量原料药或制剂中特定杂质的含量; - 加标回收实验评估分析方法的准确度; - 检测限/定量限(LOD/LOQ)的测定验证方法灵敏度; - 在LC-MS/MS多反应监测(MRM)模式中作为校正标准品使用。 作为认证标准物质(CRM),鲁拉西酮杂质41满足CNAS-CL04(ISO/IEC 17025)对标准物质的计量溯源性要求。批间一致性通过控制图(Control Chart)进行持续监控,保证不同批次间量值的一致性。

Lurasidone Impurity 41 (CAS 3205-34-3) is supplied by CATO as impurity reference standards for analytical and quality-control use.

Molecular formula C8H16O2, molecular weight 144.21 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.

Lurasidone Impurity 41 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.

Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.

应用场景Application notes

在药品质量控制和药物分析实验室中,鲁拉西酮杂质41(CAS 3205-34-3)凭借其>95%的纯度做为基础物质,为定量分析提供基准参照。 推荐应用流程: 1. 样品前处理 — 依据原料药或制剂特性,选择适当的提取和净化方法; 2. 色谱条件建立 — 以鲁拉西酮杂质41(纯度>95%)配制系统适用性溶液,验证分离度(Rs)不小于1.5; 3. 系统适用性 — 连续进样6针计算峰面积RSD,应不大于2.0%; 4. 定量流程 — 外标法或校正因子法计算目标杂质含量,结果以%面积报告。 质量控制要求:每批分析应包含空白、质控和双重分析(duplicate)以验证

Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.

Detailed recommended procedures are provided in the Chinese datasheet.

理化性质Physical & Chemical Properties

外观形态Appearance白色至类白色液体
储存条件Storage2-8°C冷藏保存
溶解性参考Solubility可溶于甲醇、乙腈、DMSO、水(微溶)
稳定性Stability在推荐条件下性质稳定
化合物类型Compound Type药物杂质对照品
子类Sub-classEP药典杂质
不饱和度(DBE)Unsaturation (DBE)1.0
CAS登记年份(估)CAS Reg. Year (est.)1957年

性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.

结构标识Identifiers

SMILESC1CC[C@@H]([C@H](C1)CO)CO
InChIKeyXDODWINGEHBYRT-HTQZYQBOSA-N
IUPAC Name[(1S,2S)-2-(hydroxymethyl)cyclohexyl]methanol

标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.

杂质信息与使用建议Impurity information and usage notes

以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.

典型用途Typical use

常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.

储存与操作Storage and handling

标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.

质量文件Quality documentation

随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.

杂质类型Impurity class

按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.

询价 / 索取 COARequest a quote / COA

提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.

常规规格Standard pack sizes现货In stock