常规杂质对照品,用于杂质谱定位、强制降解产物的峰归属以及外标法定量;建议同时确认主峰与相邻杂质峰的分离度 ≥1.5。A conventional impurity standard for impurity profiling, peak assignment of forced-degradation products and external-standard quantification; confirm resolution ≥1.5 between the main peak and adjacent impurities.
鲁拉西酮杂质56Lurasidone Impurity 56CAS 号No. 173658-50-9
Lurasidone Impurity 56
| CAS 号CAS No. | 173658-50-9 |
| 分子式Molecular Formula | C10H20O6S2 |
| 分子量Molecular Weight | 300.4 g/mol |
| 分类Category | 药物杂质对照品 / Impurity Reference StandardsImpurity Reference Standards |
| 纯度Purity | >95% |
| 库存状态Stock | 现货 97%+ |
化学结构式Chemical structure

结构式由公开数据库渲染,仅供参考,以厂家图谱为准Structure rendered from public databases — indicative only
需要报价或 COA?Need a quote or COA?
直接联系销售顾问卢振明,附上本品 CAS 号即可(电话/微信/邮箱见页脚)。Contact our sales engineer Kaka Lu with this CAS number — phone, WeChat and e-mail are in the footer.
提交在线询价Submit enquiry产品介绍Product description
本产品为药物杂质对照品鲁拉西酮杂质56(Lurasidone Impurity 56,CAS 173658-50-9),分子式 C10H20O6S2,分子量 300.39。纯度 97%+。适用于分析方法开发、方法验证及日常质检,CATO 提供全程冷链与全球配送。
CAS编号 173658-50-9 对应的鲁拉西酮杂质56(Lurasidone Impurity 56),是化学式为 C10H20O6S2 的药物杂质标准品,相对分子质量 300.39。 依据分子式为 C10H20O6S2 的鲁拉西酮杂质56结构特征,其分子内含含砜基,羧酸类,含羟基,含醚键,这意味着该化合物在红外光谱中会呈现特征性的官能团伸缩振动信号。分子量 300.39 g/mol 这一参数对质谱检测中的分子离子峰识别具有直接参考价值。 在色谱分析方法开发中,鲁拉西酮杂质56(纯度97%+)可用于: - 确定相对保留时间(RRT),建立杂质定位参考点; - 计算相对响应因子(RRF),评估检测器响应差异; - 验证梯度洗脱程序的重现性和耐用性; - 考察色谱柱批次间分离效果的一致性。 本品定值报告包含以下质量控制信息: - 主成分含量:97%+; - 水分/残留溶剂:通过卡尔费休(KF)和热重分析(TGA)测定并校正; - 定值方法:HPLC-DAD面积归一化法、qNMR法、DSC法等正交验证; - 不确定度:
Lurasidone Impurity 56 (CAS 173658-50-9) is supplied by CATO as impurity reference standards for analytical and quality-control use.
Molecular formula C10H20O6S2, molecular weight 300.4 g/mol. Supplied typically at >95% purity and normally held in stock. Each lot is accompanied by purity data and, where applicable, structural confirmation data; a certificate of analysis (COA) is available on request.
Lurasidone Impurity 56 is intended for use as a calibration standard, system suitability reference or impurity marker in quantitative analysis by HPLC, GC, LC-MS/MS or GC-MS.
Full technical description and application notes are available in the Chinese datasheet. Please contact our sales engineer for a translated summary.
应用场景Application notes
在药品质量控制和药物分析实验室中,鲁拉西酮杂质56(CAS 173658-50-9)凭借其97%+的纯度做为基础物质,为定量分析提供基准参照。 推荐应用流程: 1. 样品前处理 — 依据原料药或制剂特性,选择适当的提取和净化方法; 2. 色谱条件建立 — 以鲁拉西酮杂质56(纯度97%+)配制系统适用性溶液,验证分离度(Rs)不小于1.5; 3. 系统适用性 — 连续进样6针计算峰面积RSD,应不大于2.0%; 4. 定量流程 — 外标法或校正因子法计算目标杂质含量,结果以%面积报告。 质量控制要求:每批分析应包含空白、质控和双重分析(duplicate)以
Typical applications include: external-standard calibration curves; system suitability testing (resolution ≥ 1.5, peak-area RSD ≤ 2.0% over six injections); identification and quantification of related substances; forced-degradation and stability-indicating studies; and method validation for impurity limits. Prepare working solutions freshly for low-concentration use (<10 µg/mL) and protect from light.
Detailed recommended procedures are provided in the Chinese datasheet.
理化性质Physical & Chemical Properties
| 外观形态Appearance | 白色至类白色结晶性粉末。(含硫化合物特征性气味) |
| 储存条件Storage | 阴凉处(≤25°C)保存,密封防潮 |
| 溶解性参考Solubility | 可溶于甲醇、乙醇、DMSO |
| 稳定性Stability | 具有吸湿性,开封后应立即密封 |
| 化合物类型Compound Type | 药物杂质对照品 |
| 子类Sub-class | EP药典杂质 |
| 不饱和度(DBE)Unsaturation (DBE) | 1.0 |
| CAS登记年份(估)CAS Reg. Year (est.) | 2006年 |
| 含硫原子数含硫原子数 | 2 |
性质数据摘录自厂家技术资料,实际数值以随货 COA 与书面确认为准。Quoted from the manufacturer's datasheet; the COA and our written confirmation prevail.
结构标识Identifiers
标识数据来自 PubChem 公开数据库的 CAS 匹配结果,仅用于结构交叉核对,以厂家图谱为准。Identifiers matched from the public PubChem database by CAS number for cross-checking only; the manufacturer's spectral data prevails.
杂质信息与使用建议Impurity information and usage notes
以下为通行实践提示,供方法开发与采购决策参考。General practice notes to support method development and purchasing decisions.
标准品建议 −20 ℃ 避光、干燥、密封保存;配制成溶液后现配现用,并在记录中注明开瓶日期与所用溶剂。Store at −20 °C, protected from light and moisture, in a well-sealed container. Prepare solutions fresh and record the opening date and solvent used.
随货提供 COA 及 HPLC、MS、NMR 等多维度定值数据;可按批索取图谱原始文件。The COA is supplied with multi-dimensional value-assignment data (HPLC, MS, NMR); raw spectra are available per lot on request.
按名称归类为「杂质对照品」。具体归属请以你们的工艺与降解研究结论为准。Classified by name as “Impurity standard”. Final assignment should follow your own process and degradation studies.
询价 / 索取 COARequest a quote / COA
提交后由销售顾问 卢振明 直接对接,通常 1 个工作日内回复价格、纯度、规格与货期。Your enquiry goes directly to our sales engineer Kaka Lu, who normally replies with price, purity, pack size and lead time within one business day.
同品种其他杂质Other impurities of this drug substance
查看「盐酸鲁拉西酮」全部杂质 →View all Lurasidone Hydrochloride impurities →